Serving the Rochester area  ·  (585) 298-9938  ·  Open Mon-Sun 7am-7pm
📞 (585) 298-9938 Free Quote

Metal Roofing in Brighton, NY (14618) · Local Professionals

Rochester Metal Roofing · Fast response in Brighton and the Rochester area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+266Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Brighton, NY 14618 is full of 1920s-60s colonials and ranches under mature maples, with low-pitched shingle roofs that are showing their age. From the streets off Monroe Avenue to the quiet blocks near Brighton High School, these homes need roofing that can handle lake-effect snow, ice dams, and heavy spring rains. We know this housing stock inside and out.

Homeowners in Brighton call Rochester Metal Roofing because we specialize in metal roofing systems that last. Whether you're near the Erie Canal or off Winton Road, we bring insured crews, honest estimates, and a focus on standing seam and gutter work that fits the character of your neighborhood.

Metal Roofing in Brighton (14618)

Brighton's terrain is gently rolling, with many lots sloping away from the street, which can create drainage challenges and require careful gutter design. The mature maples and oaks that shade these neighborhoods are beautiful, but they drop limbs and debris that clog gutters and stress older shingle roofs. Many homes here have low-pitched roofs, making them prone to ice dams at the eaves during our long, snowy winters. We often recommend standing seam metal roofing for its ability to shed snow and resist ice dam formation, and we always include proper underlayment and ventilation.

Our team has been serving Brighton and the greater Rochester area for years, and we understand the specific needs of homes in 14618. From the colonials near Highland Park to the ranches off East Avenue, we've seen it all. We're fully insured and committed to doing the job right the first time.

Our services in Brighton

How a Job Works in Brighton

Step 1: Give us a call at (585) 298-9938 or request a free estimate online. We'll schedule an on-site assessment at your Brighton home, where we'll inspect your current roof, discuss your options, and provide a detailed written estimate. We'll also check for any permit requirements with the Town of Brighton.

Step 2: Once you approve the estimate, we'll order materials and schedule your installation. For many Brighton homes, tight lot access and mature landscaping require careful planning, so we'll coordinate delivery and staging to minimize disruption. If your home is in a historic district or HOA, we'll help you navigate design approval. We'll pull the necessary permits and keep you informed throughout the process.

Step 3: After installation, we'll do a thorough cleanup, including magnet sweeps for nails, and walk through the finished roof with you to ensure everything meets your expectations. We leave your property clean and your new roof ready to protect your home for decades.

Pricing for metal roofing in Brighton depends on the size of your roof, its complexity, access, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you're considering a retrofit over existing shingles, that starts at $7 per square foot. Repairs start at $450, and gutter installation for metal roofs starts at $9 per linear foot. These are starting prices, and your final quote will reflect your specific project. Call us at (585) 298-9938 for a free estimate and to discuss your options.

My Brighton colonial has a low-pitched roof and we get ice dams every winter. Can a metal roof help?
Yes. Metal roofs, especially standing seam, shed snow more effectively than shingles, reducing the chance for ice dams to form. We also ensure proper attic insulation and ventilation, which are key to preventing ice dams. For homes in Brighton with low slopes, we often recommend standing seam with a snow guard system to manage snow shedding safely.
A storm just knocked a limb onto my roof in Brighton. How quickly can you respond for emergency repair?
We offer emergency storm and wind damage repair, and we prioritize active leaks and structural damage. Call us at (585) 298-9938, and we'll schedule an inspection as soon as possible, often within 24 to 48 hours. We'll tarp or repair the damage to prevent further issues and provide a full estimate for permanent repairs.
What's the typical cost for a metal roof replacement on a 1,500-square-foot ranch in Brighton?
For a ranch that size, you can expect a metal roof replacement to start around $9 per square foot, so roughly $13,500 for the roofing material and installation, depending on the metal type and roof complexity. Additional factors like gutter replacement, skylight flashing, or chimney work can affect the total. We provide free estimates to give you an accurate number.
Do I need a permit for a metal roof in Brighton, and does the town have any special requirements?
Yes, the Town of Brighton typically requires a building permit for roof replacements. Requirements vary, so we always verify with the Brighton Building Department before starting work. We handle the permit application process for you, ensuring compliance with local codes, including any historic district or HOA design guidelines.
My neighbor's tree hangs over my property line. Can I trim it to install my new metal roof, and what if my HOA has rules about roof color?
In New York, you generally have the right to trim branches that overhang your property, but it's best to check with a lawyer or your neighbor first. For HOA rules, we can provide color samples and documentation to help you get approval. We're experienced with HOA coordination and can suggest profiles and colors that meet your community's standards.
Are you fully insured for roofing work in Brighton?
Absolutely. We carry general liability insurance and workers' compensation coverage for all our crews.
What maintenance does a metal roof need in Brighton's climate?
Metal roofs are low-maintenance, but in Brighton's snowy climate, we recommend annual inspections, especially after winter, to check for loose fasteners, debris accumulation, and snow guard condition. Keeping gutters clean is also important to prevent ice dams. We offer maintenance plans and inspections to keep your roof in top shape.
Why choose us?

Trusted professionals in Rochester

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Rochester

All your work handled by qualified professionals in Rochester

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

266+ Verified Client Reviews in Rochester

⭐⭐⭐⭐⭐ 4.9/5 · 266 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Rochester · Response within 24h · No commitment · ☎ (585) 298-9938

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Rochester ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm