Serving the Rochester area  ·  (585) 298-9938  ·  Open Mon-Sun 7am-7pm
📞 (585) 298-9938 Free Quote

Metal Roofing in Hilton, NY (14468) · Local Professionals

Rochester Metal Roofing · Fast response in Hilton and the Rochester area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+266Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Hilton is a village where the orchards meet the lake plain, and the rooftops tell that story: steep gables on older village homes near the Four Corners, low-slope shingle roofs on 1950s ranches off Route 259, and long metal barns out on the orchard roads toward Parma and Clarkson.

We're Rochester Metal Roofing, and we work Hilton ZIP 14468 every week. From the older homes near Hilton-Parma Park to the farm buildings along Curtis Road, we know how lake-effect snow and freeze-thaw cycles treat metal here, and we build roofs that handle it.

Metal Roofing in Hilton (14468)

Hilton sits on the Lake Ontario plain, which means flat to gently rolling ground, heavy clay soils in spots, and a water table that can stay high well into spring. On village lots, that shows up as tight side yards and mature maples whose roots crowd the foundation, so roof runoff and gutter placement matter as much as the panels themselves. On the orchard and farm properties west and north of the village, we're often working on barns and outbuildings with long roof runs, failing fasteners, and snow loads that slide hard. The wind coming off the lake is no joke either, and we spec fasteners and clips for it. Older homes near the Four Corners and along East Avenue often have layered shingle roofs that need a proper tear-off before we talk about standing seam or stone-coated steel. And because so many Hilton roofs are shaded by big trees, we pay close attention to debris buildup at valleys and chimneys, which is where ice dams start.

Our team has been serving Hilton and the surrounding Rochester area long enough to know which streets flood, which barns need screw replacement before winter, and which village homes need a historic-sensitive panel profile. We're fully insured with general liability and workers' compensation, and we pull permits through the proper local building department for every job that needs one.

Our services in Hilton

How a Job Works in Hilton

Step 1: You call us at (585) 298-9938 or request a free estimate online. We schedule an on-site assessment, walk the roof and the ground with you, and talk through what we see: fastener condition, seam separation, flashing at chimneys and skylights, gutter pitch, and whether an overlay makes sense or a full tear-off is the right call. You get a written scope and price before anything starts.

Step 2: We handle the permit paperwork with the local building department and coordinate timing around Hilton's weather windows, which usually means getting water-tight before the lake-effect season sets in. On tight village lots we stage materials in the driveway and keep the crew footprint small. If your home is in a historic district or under HOA design review, we help you get panel profile and color approved before we order. For barns and commercial buildings, we plan around your operation so we're not blocking the drive during harvest or deliveries.

Step 3: Cleanup is part of the job. We magnet-sweep for fasteners and trimmings, haul away old shingles and metal, and do a final walkthrough with you. We don't leave until you've seen the finished roof and we've answered every question.

Pricing in Hilton depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Corrugated and ribbed panel roofing starts near $5.50 per square foot, which is often the right fit for barns and sheds. Repairs and leak calls start around $450, screw replacement and re-fastening around $750, and flashing or chimney work around $600. Snow guards and ice protection start around $1,200, and gutters for metal roofs run about $9 per linear foot. The biggest cost factors are square footage, how many layers we're removing, roof complexity (valleys, dormers, chimneys), and urgency after a storm. Call (585) 298-9938 for a free estimate and a straight answer.

My 1950s ranch off Route 259 has a low-pitch shingle roof. Can I put metal over it, or do I need a tear-off?
Low-slope roofs are common in Hilton, and an overlay is sometimes possible, but code limits how many existing layers you can cover. We check the deck condition and the layer count first. If the shingles are curling or the deck is soft, a tear-off is the safer call, and we'll tell you why.
A storm just peeled back panels on my barn near Curtis Road. How fast can you get out?
We prioritize active leaks and wind damage in Hilton and the surrounding towns. Call (585) 298-9938 and we'll schedule a free inspection, usually within a day or two depending on storm volume. We can tarp or secure the area to stop further damage while we scope the repair.
What does a typical metal roof repair cost in Hilton?
Most repair and leak calls start around $450, screw replacement and re-fastening around $750, and flashing or chimney work around $600. The final price depends on roof access, how many fasteners or panels are involved, and whether the leak traces back to flashing or a seam. We give you a written number before work starts.
Do I need a permit for a metal roof in Hilton, and who handles it?
A full replacement or re-roof commonly requires a permit, and thresholds and inspection requirements vary by jurisdiction. We pull the permit through the local building department and coordinate the inspection. If your home is in a historic district or under HOA review, we also help with the design approval paperwork.
My neighbor's tree drops limbs on my roof and we're not sure where the property line is. Can you help?
We can inspect and document the damage and give you a written report you can share with your neighbor or insurer. We don't survey property lines, but we can tell you exactly where the damage is and what it takes to fix it. If an HOA is involved, we'll coordinate color and profile approval before ordering materials.
Are you insured for work on my Hilton property?
Yes. That protects you if anything goes wrong on the job.
What should I do to get my metal roof ready for Hilton's lake-effect winter?
Late summer and early fall are the right time. We check fasteners for backing out, clear valleys and gutters of maple and apple debris, inspect flashing at chimneys and skylights, and confirm snow guards are secure. Ice dams at the eaves are the big winter risk here, so we also check attic ventilation and insulation at the same visit.
Why choose us?

Trusted professionals in Rochester

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Rochester

All your work handled by qualified professionals in Rochester

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

266+ Verified Client Reviews in Rochester

⭐⭐⭐⭐⭐ 4.9/5 · 266 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Rochester · Response within 24h · No commitment · ☎ (585) 298-9938

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Rochester ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm