Serving the Rochester area  ·  (585) 298-9938  ·  Open Mon-Sun 7am-7pm
📞 (585) 298-9938 Free Quote

Metal Roofing in Scottsville, NY (14546) · Local Professionals

Rochester Metal Roofing · Fast response in Scottsville and the Rochester area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+266Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Scottsville is a small village where the Oatka Creek cuts through farm country and the old Erie Canal corridor, and the housing stock reflects that mix: 19th-century village homes with steep gables, mid-century ranches on the outskirts, and barns and outbuildings on the surrounding fruit farms. Metal roofing makes sense here because the lake-effect snow and ice don't care whether you're on a village lot or a 40-acre orchard.

Homeowners in 14546 call Rochester Metal Roofing because we understand the specific challenges of roofing in this part of Monroe County: heavy snow loads, freeze-thaw cycles that work on fasteners and seams, and the need for durable, low-maintenance roofs that can handle everything from a Victorian near the creek to a pole barn on a farm. We're fully insured and we show up when we say we will.

Metal Roofing in Scottsville (14546)

Scottsville sits in the Oatka Creek valley, and that geography matters for roofing. The creek brings humidity and occasional flooding concerns, and the surrounding farmland means wind exposure is different than in the city. Village homes often have steep pitches and tight lots with mature trees, while the farms and rural properties have outbuildings and barns that need corrugated or ribbed panel roofing that can stand up to snow sliding and wind. We see a lot of ice damming at the eaves on older homes, and we know how to detail flashings and underlayment to handle it. Whether it's a standing seam roof on a remodeled farmhouse or a metal roof over shingles on a ranch, we match the system to the building and the site.

Our team has worked on roofs throughout Scottsville and the surrounding towns, from the village center near the Oatka Creek to the farms out on River Road and Scottsville-Mumford Road. We know the local building department requirements and can help you navigate permits for a full replacement or re-roof. We also understand the historic character of some village homes and can recommend profiles and colors that fit.

Our services in Scottsville

How a Job Works in Scottsville

Step 1: You call us at (585) 298-9938 or request a free estimate online. We schedule an on-site assessment at your Scottsville property, where we inspect your current roof, check the decking and flashings, and talk through your options. We'll give you a written estimate with clear pricing and no surprises.

Step 2: Once you approve, we pull the necessary permits with the local building department and schedule the work. For village homes with tight driveways or mature trees, we plan access carefully. For farm properties, we coordinate around your schedule. Our crew is fully insured and trained on all the metal roofing systems we install, from standing seam to corrugated panels.

Step 3: When the job is done, we clean up thoroughly, haul away all debris, and walk the property with you to make sure you're satisfied. We don't leave until you're happy with the result.

Pricing for metal roofing in Scottsville depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you're retrofitting over existing shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. We also offer free estimates for inspections and storm damage assessments. Call (585) 298-9938 to get a precise quote for your Scottsville home.

My house is near the Oatka Creek and the roof gets heavy snow and ice. What's the best metal roofing option for that?
For homes near the creek and in the village, we often recommend standing seam metal roofing because it sheds snow well and has concealed fasteners that resist ice damming. We also pay close attention to underlayment and flashing details to keep water out. A free inspection will help us determine the best system for your specific roof pitch and condition.
A storm just blew some panels loose on my barn off Scottsville-Mumford Road. Can you come out quickly?
Yes, we handle storm and wind damage repairs in Scottsville and the surrounding area. Call us at (585) 298-9938 and we'll schedule a prompt inspection. We can secure loose panels, replace damaged fasteners, and make temporary repairs if needed to prevent further damage.
What does a typical metal roof replacement cost for a ranch home in the 14546 zip code?
For a typical ranch home, metal roof replacement starts around $9 per square foot, but the final price depends on the roof size, pitch, and whether we need to remove existing layers. We provide free estimates so you can get an accurate number for your property.
Do I need a permit from the Town of Wheatland for a new metal roof in Scottsville?
Yes, roofing permits are commonly required for a full replacement or re-roof, and requirements vary. We recommend checking with the local building department to confirm the rules for your property. We can help you navigate the permit process as part of our service.
My neighbor and I share a property line, and I'm worried about the roof overhang. How do you handle that?
We're careful to respect property lines and work with your neighbor if access is needed. If your home is in an HOA or historic district, we can also help you get approval for the panel profile and color before we start.
Are you fully insured for roofing work in Scottsville?
Yes, we carry general liability and workers' compensation insurance for all our crews. We're happy to provide proof of insurance upon request.
What maintenance does a metal roof need in Scottsville's climate?
Metal roofs are low maintenance, but we recommend periodic inspections, especially after heavy snow or storms. Checking fasteners and clearing debris from valleys and gutters can prevent issues. We offer free inspections to help you stay ahead of problems.
Why choose us?

Trusted professionals in Rochester

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Rochester

All your work handled by qualified professionals in Rochester

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

266+ Verified Client Reviews in Rochester

⭐⭐⭐⭐⭐ 4.9/5 · 266 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Rochester · Response within 24h · No commitment · ☎ (585) 298-9938

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Rochester ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm