Serving the Rochester area  ·  (585) 298-9938  ·  Open Mon-Sun 7am-7pm
📞 (585) 298-9938 Free Quote

Metal Roofing in Brockport, NY (14420) · Local Professionals

Rochester Metal Roofing · Fast response in Brockport and the Rochester area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+266Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Brockport is a canal town with a college problem, and I mean that in the best way. The Village of Brockport sits right on the Erie Canal, and the housing stock around SUNY Brockport and along the old village streets is a mix of 19th-century homes with steep gables and low-slope porch roofs, plus mid-century ranches and newer builds out toward Sweden and Clarkson. The canal keeps moisture in the air, and the lake-effect snow off Lake Ontario piles up on these roofs for months.

Homeowners in 14420 call Rochester Metal Roofing because we know the difference between a roof that fails from snow load and one that fails from ice damming at the eaves. Whether you are near the Brockport Welcome Center or out on a farm road toward the lake, we have seen the same problems on your street.

Metal Roofing in Brockport (14420)

Brockport has a specific set of roofing challenges. The village core has older homes with steep pitches and complex rooflines, which means flashing details around chimneys and dormers matter more than the panels themselves. The canal corridor adds humidity, and older roofs often have multiple layers of shingles that need to come off before we can install metal. Out in the towns of Sweden and Clarkson, properties are larger, with barns, garages, and outbuildings that often need corrugated or ribbed panel roofing. Access can be tight on village lots, and we plan for that with smaller equipment and careful staging. The ground here is flat to gently rolling, so drainage away from the foundation is usually good, but we still check gutter pitch and downspout placement on every job.

Our team has worked on roofs all over Monroe County, from the Park Avenue historic district to the farm country west of Brockport. We know what the local building department expects, and we know how to handle snow guards and ice protection so your gutters and entryways stay safe in February.

Our services in Brockport

How a Job Works in Brockport

Step 1: You call us at (585) 298-9938 or request a free estimate online. We schedule an on-site assessment, usually within a few days. We look at the roof, the attic, the flashing, and the gutters, and we give you a written scope with pricing. If it is a repair, we tell you what we can fix and what might need replacement.

Step 2: Once you approve, we pull the permit if one is required. In Brockport, a full re-roof usually needs a permit, and the village or town inspector will check the work. We coordinate with the building department so you do not have to. On tight village lots, we stage materials on the driveway or street according to local rules, and we protect your landscaping. For historic homes or if you are in an HOA, we help you submit the paperwork for color and profile approval.

Step 3: When the work is done, we clean up completely. We magnet-sweep for nails, haul away old materials, and walk the roof with you to show you the finished job. We do not leave until you are satisfied.

Pricing in Brockport depends on the size and pitch of your roof, how many layers are already there, and how accessible the property is. For a typical ranch or Cape Cod, metal roof installation starts around $8 per square foot, and standing seam starts around $10. A full replacement starts around $9, and a retrofit over existing shingles starts around $7. Repairs start at $450, and screw replacement or re-fastening starts at $750. Snow guards and ice protection start at $1,200, which is common on older homes with steep roofs and entryways below. We give free estimates and we stick to them. Call (585) 298-9938 to schedule yours.

My house is near the Erie Canal in Brockport and the roof is always damp. Will metal help?
Yes. Metal roofs shed water and snow much better than asphalt, and they do not absorb moisture. The canal area stays humid, so we also check ventilation and flashing details to make sure moisture does not get trapped. We can install a metal roof that handles the humidity and keeps your attic drier.
A storm just blew some panels loose on my barn in Brockport. Can you fix it fast?
We handle storm and wind damage repairs in Brockport and the surrounding towns. Call us at (585) 298-9938 and we will schedule an inspection, usually within a day or two. We can secure the panels temporarily if needed and give you a repair estimate.
What does a metal roof cost for a typical Brockport home?
For a 1,500 to 2,000 square foot ranch or Cape Cod, you are looking at roughly $12,000 to $20,000 for installation, depending on the material and pitch. Repairs are much less, starting at $450. We give free estimates so you know exactly what your roof needs.
Do I need a permit for a metal roof in Brockport?
Most full replacements and re-roofs require a permit from the Village of Brockport or the Town of Sweden, depending on where you live. Requirements vary, so we always check with the local building department before starting. We handle the permit application for you.
My neighbor's tree hangs over my roof. What are my options if branches damage it?
If a branch from a neighbor's tree damages your roof, your insurance may cover the repair, and we can document the damage for your claim. We do not get involved in property line disputes, but we can trim back branches that are rubbing the roof during installation and recommend a snow guard layout that protects the area.
Are you insured for work on my property in Brockport?
Yes, we are fully insured with general liability and workers' compensation coverage. You do not have to worry about liability if someone gets hurt on the job.
How often should I check my metal roof in Brockport for snow and ice damage?
Check it every spring after the snow melts and again in late fall before winter. Look for loose screws, dented panels, or ice dams at the eaves. We offer free inspections and can tune up your roof with new screws and snow guards to prevent problems.
Why choose us?

Trusted professionals in Rochester

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Rochester

All your work handled by qualified professionals in Rochester

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

266+ Verified Client Reviews in Rochester

⭐⭐⭐⭐⭐ 4.9/5 · 266 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Rochester · Response within 24h · No commitment · ☎ (585) 298-9938

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Rochester ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm