Serving the Rochester area  ·  (585) 298-9938  ·  Open Mon-Sun 7am-7pm
📞 (585) 298-9938 Free Quote

Metal Roofing in Gates, NY (14606) · Local Professionals

Rochester Metal Roofing · Fast response in Gates and the Rochester area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (585) 298-9938
+266Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Gates is a west-side Rochester suburb where the housing boom after World War II left behind block after block of brick ranches and split-levels with low-pitch roofs, plus small commercial buildings along Spencerport Road and Lyell Avenue. Those roofs have taken more than half a century of lake-effect snow, freeze-thaw cycles, and summer storms, and many are now at the end of their service life. If you live in Gates or anywhere in ZIP 14606, you know the drill: ice dams at the eaves, shingles curling after a hard winter, and gutters that pull loose from the fascia.

Rochester Metal Roofing is based just east of you in Rochester, and we work in Gates constantly. From the streets off Elmgrove Road to the older homes near the Gates Public Library, we have seen what this climate does to a roof. That is why so many homeowners here call us for metal roof repair, replacement, or a metal roof over shingles retrofit that saves them the cost and mess of a full tear-off.

Metal Roofing in Gates (14606)

Gates is mostly flat to gently rolling ground, but the lot sizes and access vary a lot. The post-war ranches on streets like Lyell Road and Hinchey Road often have wide, open front yards but tight side yards and driveways, which means our crews have to plan material staging carefully. Older properties closer to the city line may have detached garages and mature trees whose limbs drop onto roofs during ice storms. And because many of these homes have low-slope roofs, ice damming is a real issue at the eaves, especially on north-facing slopes that stay shaded all winter. We see it all the time: water backing up under the shingles and staining ceilings in the rooms below.

Our team has been installing and repairing metal roofing across Monroe County for years, and we know the specific failure points in Gates. We also know that a metal roof over shingles can be a smart option for these older homes as long as the existing layers are within code limits, which we always verify with the local building department before we recommend it.

Our services in Gates

How a Job Works in Gates

Step 1: You call us at (585) 298-9938 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and we walk your roof with you to identify leaks, damaged flashing, loose fasteners, or storm damage. You get a written estimate with clear pricing before any work begins.

Step 2: Once you approve, we pull the required permits through the Town of Gates building department, order materials, and schedule the crew. For tight lots, we plan where the dumpster and materials will sit so we don't block your driveway or your neighbor's. If your home is in a subdivision with an HOA, we help you submit the panel profile and color for approval before we order.

Step 3: When the work is done, we do a full cleanup, including magnet sweeping for nails, and we walk the roof and gutters with you to make sure everything is watertight and properly fastened. We don't leave until you're satisfied.

Pricing for metal roofing in Gates depends on the size and pitch of your roof, the condition of the decking, how many layers of shingles are already there, and the complexity of flashing around chimneys and skylights. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. A retrofit over existing shingles starts at $7 per square foot. Repairs for leaks or damaged panels start at $450, screw replacement and re-fastening starts at $750, and flashing or chimney repair starts at $600. We always provide a free estimate so you know the exact cost for your home before we start. Call (585) 298-9938 to schedule.

My ranch on Lyell Road has ice dams every winter. Can a metal roof stop that?
Ice dams form when heat escapes through the roof and melts snow, which refreezes at the cold eaves. A metal roof with proper underlayment and ventilation helps, but the real fix is air sealing and insulation in the attic. We can assess your roof and recommend a metal system that handles snow better, plus snow guards to keep it from sliding off in sheets.
A storm just peeled back some panels on my garage. How fast can you get to Gates?
We prioritize storm damage calls in Gates and the surrounding area. Call us at (585) 298-9938 and we will schedule an inspection as soon as possible, often the same day or next. We can tarp or secure the roof to prevent further water damage and then give you a repair estimate.
What does a typical metal roof replacement cost for a 1,500-square-foot ranch in Gates?
For a basic corrugated or ribbed panel roof, you might be looking at around $5.50 to $8 per square foot installed, so a 1,500-square-foot roof could range from roughly $8,000 to $12,000 depending on pitch, tear-off, and trim. Standing seam or stone-coated steel will be higher. We give free estimates with exact numbers after seeing your roof.
Do I need a permit for a metal roof in Gates, and who handles it?
Yes, the Town of Gates requires a building permit for roof replacement or re-roofing. We handle the permit application and coordinate inspections with the town building department as part of our service. Requirements can change, so we always confirm the current rules before starting.
My neighbor's tree hangs over my roof. What are my rights if limbs damage my metal roof?
In New York, you generally have the right to trim branches that overhang your property line, but you should check local ordinances and talk to your neighbor first. If a limb falls and damages your roof, your homeowners insurance may cover it. We can document the damage for your claim and make repairs.
Are you fully insured for roofing work in Gates?
Yes, Rochester Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Gates's climate?
Metal roofs are low maintenance, but in our lake-effect snow climate you should check fasteners and seals annually, clear debris from gutters and valleys, and make sure snow guards are secure. We offer free inspections to catch small issues before they become leaks, especially after a heavy winter.

Nearby service areas

📍 Rochester 14605📍 Brighton 14618📍 Irondequoit 14622📍 Greece 14626
Why choose us?

Trusted professionals in Rochester

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Rochester

All your work handled by qualified professionals in Rochester

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

266+ Verified Client Reviews in Rochester

⭐⭐⭐⭐⭐ 4.9/5 · 266 verified Google reviews

Emily C.
⭐⭐⭐⭐⭐
EC
Emily C.
Rochester

“Had them put a metal roof on our hay barn out past the county line, about 4,000 square feet of corrugated panel. Crew of four knocked it out in three days and hauled away every last scrap of the old tin. The barn's never been this dry.”

Commercial & Agricultural Metal Roofing
Karen T.
⭐⭐⭐⭐⭐
KT
Karen T.
Brighton

“We wanted the porch over our brick entry covered but dreaded the mess of a tear-off. They retrofitted standing seam right over the existing shingles instead. Two days, no dumpster in the driveway, and it looks like it was always meant to be there.”

Metal Roof Over Shingles (Retrofit)
Robert M.
⭐⭐⭐⭐⭐
RM
Robert M.
Webster

“Our old farmhouse barn roof was rusted through in spots and I figured it was a goner. They replaced the whole thing with ribbed panels and even matched the pitch on the lean-to. Grateful isn't a strong enough word, that building holds our whole operation.”

Metal Roof Replacement
Chris A.
⭐⭐⭐⭐
CA
Chris A.
Pittsford

“They installed our standing seam roof in the middle of January, which I honestly didn't think was possible. The crew worked around the cold snaps and still finished in under two weeks. Only gripe is they left a few metal shavings in the gutter that I had to rinse out myself.”

Standing Seam Metal Roofing
James P.
⭐⭐⭐⭐⭐
JP
James P.
Greece

“Water was coming in around the chimney flashing every time it rained hard. They found the leak, resealed the flashing, and replaced a handful of backed-out screws while they were up there. Haven't seen a drop since, and the price was honestly less than I expected.”

Metal Roof Leak Repair
Kevin R.
⭐⭐⭐⭐⭐
KR
Kevin R.
Irondequoit

“Went with stone-coated steel for the house and I'm still surprised every time I pull in the driveway, it looks like high-end shingle but it's steel. They walked me through samples for a week before I committed. Clean install, clean yard, no surprises on the invoice.”

Metal Roof Installation
Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Gates

“After the ice dams last winter I had them install snow guards along the whole front of the house. Should've done it years ago. They were in and out in a single morning and explained exactly how the guards keep the snow from sliding off onto the walkway.”

Snow Guards & Ice Protection
Sarah W.
⭐⭐⭐⭐
SW
Sarah W.
Fairport

“They put a metal shingle roof on our new build and it's the sharpest-looking house on the street. Scheduling took a little longer than promised, but the finished roof is flawless and the crew cleaned up so well you couldn't tell anyone had been there.”

Metal Shingle Roofing
Free Quote

Get Your Free Quote

Metal Roofing in Rochester · Response within 24h · No commitment · ☎ (585) 298-9938

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Rochester ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm