Serving the Rochester area  ·  (585) 298-9938  ·  Open Mon-Sun 7am-7pm
📞 (585) 298-9938 Free Quote

Metal Roofing in Spencerport, NY (14559) · Local Professionals

Rochester Metal Roofing · Fast response in Spencerport and the Rochester area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+266Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Spencerport is a canal town, and the housing stock shows it: 19th-century village homes near the Erie Canal, mid-century ranches off Route 259, and farmhouses and barns out toward Ogden and Parma. The lots are long and narrow near the village center, wider and flatter out in the towns, and every one of them takes a beating from lake-effect snow coming off Lake Ontario.

Homeowners in 14559 call Rochester Metal Roofing because we know what canal-side wind and six feet of winter snow do to a roof. Whether you are near the Spencerport Depot and Canal Museum or out on a gravel road past Pineway Ponds, we install, repair, and replace metal roofing built for this climate.

Metal Roofing in Spencerport (14559)

Spencerport sits in flat to gently rolling glacial country, and the ground here holds water in spring. That matters for roofing: ice dams at the eaves are common on older village homes with steep gables, and low-pitched ranch roofs off Trimmer Road and Nichols Street collect snow that refreezes at the gutters. Barns and outbuildings on the farm edges of town need corrugated and ribbed panel roofing that sheds snow and handles wind off the open fields. We also see a lot of wind-lifted panels and failed fasteners after summer thunderstorms, especially on exposed roofs near the canal.

Our team has worked across Monroe County for years, from standing seam on modern remodels to stone-coated steel that mimics slate on older streets. We know how to schedule around lake-effect snow, and we know which panel profiles and snow guards hold up when the snow sits for months.

Our services in Spencerport

How a Job Works in Spencerport

Step 1: Call us at (585) 298-9938 or request a free estimate online. We will set up a time to walk your roof, check the deck and flashing, and talk through options. You get a written estimate with clear pricing, no pressure.

Step 2: Once you approve, we pull the permit through the local building department (requirements vary by jurisdiction, so we verify before we start) and schedule the crew. In Spencerport, tight driveways near the village mean we plan material drops carefully, and we coordinate with HOAs where they apply. Most residential metal roofs take a few days to a week depending on size and complexity.

Step 3: We clean up every day and do a final walkthrough with you. Magnets sweep the yard for screws and scraps, and we make sure you know how the new roof and gutters work before we leave.

Pricing in Spencerport depends on the job, but here are realistic starting points: corrugated and ribbed panel roofing starts at $5.50 per square foot, metal roof over shingles (retrofit) at $7, metal roof installation at $8, and standing seam at $10. Repairs start at $450, screw replacement and re-fastening at $750, and snow guards and ice protection at $1,200. A full replacement typically runs $9 per square foot and up. Size, roof pitch, access, and urgency all affect the final number. Call (585) 298-9938 for a free estimate on your Spencerport property.

My 1920s house near the Erie Canal has ice dams every winter. Can a metal roof help?
Yes. Metal roofs shed snow better than asphalt, and we can add snow guards and proper underlayment to manage ice at the eaves. We will inspect your attic ventilation and flashing too, since those often cause the problem.
Do you respond to storm damage in Spencerport after a windstorm?
We do. Call (585) 298-9938 and we will schedule a free inspection as soon as possible. We document damage for insurance claims, though coverage decisions are up to your insurer.
What does a metal roof cost for a typical ranch in Spencerport?
Most ranches fall in the $9 to $12 per square foot range for installation, depending on roof size and pitch. Corrugated panel can start lower, around $5.50 per square foot. We give firm numbers after a free on-site estimate.
Do I need a permit for a metal roof in Spencerport?
Roofing permits are commonly required for replacement or re-roof, and rules vary by jurisdiction. We handle the paperwork with the local building department and make sure the job meets code before we start.
My neighbor and I share a property line. What if the roof overhangs it?
Overhangs and drainage are governed by local setback rules and sometimes easements. We can review your survey and coordinate with your neighbor and any HOA before work begins to avoid issues.
Are you insured for work on my Spencerport home?
Yes, we are fully insured with general liability and workers' compensation coverage. We are happy to provide proof of insurance before we start.
How often should I have my metal roof inspected in Spencerport?
Once a year, ideally in late summer or early fall before lake-effect season. We check fasteners, seals, and flashing, and clear debris from valleys and gutters. It is the best way to catch small issues before winter.
Why choose us?

Trusted professionals in Rochester

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Rochester

All your work handled by qualified professionals in Rochester

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

266+ Verified Client Reviews in Rochester

⭐⭐⭐⭐⭐ 4.9/5 · 266 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Rochester · Response within 24h · No commitment · ☎ (585) 298-9938

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Rochester ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm